Can-Am - Lh Tail Light. - 710001442

Lens of the taillight had been punched in. This is a large, complex, and expensive part, but the fix is really simple. Open the tailbag and both saddlebags. Remove the eight torx screws holding the upper body panel. Remove the panel. Pop off the retaining clip at the top of the gas cylinder in the left saddlebag to get to the two torx screws holding the lower black panel in place. Remove the screws. Remove the three mounting screws holding the taillight in place, unclip the wiring harness, remove the light. Plug the new light into the harness, reverse the steps above.