Kawasaki - Coil, Assembly, Ignition - 21171-2207

Install a new coil on a john deere gator with a kawasaki engine, had to remove the engine to install the coil, a 3 total hour job, and excellent price on the coils !

Parts used in this repair

Total price:  $99.60

This item: Kawasaki COIL, ASSEMBLY, IGNITION (21171-2207) $99.60

The ignition coil on my Gator was failing intermitently. In an attempt to avoid taking things apart twice I tried to identify a replacement coil by the engine model number. Being that John Deere used a modified Kamasaki engine in my Gator this didn't work out for me. I found out that the first coil I ordered did not match the one original when I took the machine apart! (2WheelPros were great about letting me return it!)
After I got the right PN from the original coil, ordered it from 2WP, and had it in hand, the repair went smoothly. Lesson learned; make sure you're ordering the right part. Tip: the coil on this Kawasaki engine can be replaced with the engine in the machine. There are some cap screws holding the cooling shroud that can't be seen, but they can be reached unless your hands are too big. A 10mm socket on a 2 1/2" 3/8" extension works perfect. Longer or shorter, no. Another tip: The clearance between the coil and flywheel is 0.012". Set to that engine fired right up and has run without fault since.

Parts used in this repair

Total price:  $99.60

This item: Kawasaki COIL, ASSEMBLY, IGNITION (21171-2207) $99.60