OEM Parts Kawasaki Washer, 20.1X28x1

Kawasaki - Washer, 20.1X28x1 - 92022-1547

Name: Washer, 20.1X28x1
Brand: Kawasaki
SKU: OEM184033
Price: 3.49 USD
Availability: BackOrder

Check if this part fits your Kawasaki model

Manufacturer

Brand New, Genuine Kawasaki Part

Manufacturer Part#

92022-1547

Item Number

OEM184033

$3.49 MSRP $4.43

Add to cart

Backordered from the manufacturer

Frequently Bought Together

Kawasaki 16097-1058 Filter, Assembly, Oil

Kawasaki 92071-100 Grommet, Oil, Strainer

Total price: $31.97

This item: Kawasaki WASHER, 20.1X28X1 (92022-1547) $3.49

Kawasaki FILTER, ASSEMBLY, OIL (16097-1058) $12.39

Kawasaki RING-O, 35.2X2.4 (92055-1358) $6.59

Kawasaki SPRING (92144-1106) $5.14

Kawasaki GROMMET, OIL, STRAINER (92071-100) $4.36

Provided by Adept Powersports customers like you

Installation Instructions and Repair Stories

Sam from Plainfield, IN Thursday, July 12, 2018

My 2006 Kawasaki Vulcan 1500 was due for it's 30,000 mile oil and filter change. I have done this every 3,000 or so whether it needed it or not. This is something I personally can do and it saves a lot of money doing it myself.

This time I decided to clean the oil screen. I'm glad I did as it is not only the easiest and quickest way to drain the crankcase, but I also found quite a bit of ground up shiny metal at the bottom of the screen. I'm not sure what that would be from. Probably engine parts rubbing together! After cleaning the screen and attempting to reinsert the "oil screen plug", I had apparently stripped the threads on this plug.

It is much softer metal than the crankcase (luckily) and the oil just kept pouring out of the plug. I then torqued it down, probably too hard, but I didn't have it on all that tight to begin with. I figured tightening the plug would stop the leak. WRONG MOVE! It just made it worse so I knew I was hosed until I got the OEM part.

I knew that it was either the plug or the "O" ring. I took some close up pictures of the plug and could see the scars on the threads from me putting it in crooked. I searched the net and found it on a couple of places but could never quite find the EXACT part number. That's when I found 2WheelPros.com.

I got the plug, a new "O" ring for it, a new screen, and the washer that sets on top of the screen beneath the big spring. The big spring was OK and did not need replaced. I could hardly wait to get the parts. The bike was sitting for all that time without any oil but I don't think that hurt it any.

The install went fairly smooth as I took my time to make sure I gently pushed the plug/bolt into the spring while turning the bolt. This is the tricky part of replacing the screen. That big spring applies constant OUTWARD pressure against the bolt while you are trying to screw it in the crankcase. I slowly got the threads to engage and GENTLY tightened it down with the 17 mm socket until it was JUST snug. I added a half a quart of oil and double checked that it wasn't pouring out of the plug.

Satisfied, I finished putting in the rest of the Rotella 5-W40 synthetic oil. I fired her up and she purred like a kitten! I drove her around the block to get the engine nice and hot. I pulled back into the garage and laid some dry paper towel beneath the bike and let it set until the next day. I see a couple of drops dripping from the plug. That worries me a bit but I will keep an eye on the oil level as she gets older

Difficulty level: Average

Were these instructions helpful?

Parts used in this repair

Total price: $64.65

Kawasaki RING-O, 35.2X2.4 (92055-1358) $6.59

Kawasaki FILTER, ASSEMBLY, OIL (16097-1058) $12.39

Kawasaki CAP, OIL, FILTER (11012-1461) $42.18

This item: Kawasaki WASHER, 20.1X28X1 (92022-1547) $3.49

This part is utilized in 168 assemblies

1984 Kawasaki KL600 (KL600-A1)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1985 Kawasaki KL600 (KL600-B1)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1985 Kawasaki KLR250 (KL250-D2)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1986 Kawasaki KL600 (KL600-B2)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1986 Kawasaki KLR250 (KL250-D3)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1987 Kawasaki KLR250 (KL250-D4)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1987 Kawasaki Vulcan 88 (VN1500-A1)

OIL PUMP

This part is number 92022 on this diagram
Quantity required per assembly: 1

1987 Kawasaki Vulcan 88 SE (VN1500-B1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1988 Kawasaki KLR250 (KL250-D5)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1988 Kawasaki Vulcan 88 (VN1500-A2)

OIL PUMP

This part is number 92022 on this diagram
Quantity required per assembly: 1

1988 Kawasaki Vulcan 88 SE (VN1500-B2)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1989 Kawasaki KLR250 (KL250-D6)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1989 Kawasaki Vulcan 88 (VN1500-A3)

OIL PUMP

This part is number 92022 on this diagram
Quantity required per assembly: 1

1989 Kawasaki Vulcan 88 SE (VN1500-B3)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1990 Kawasaki KLR250 (KL250-D7)

SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1990 Kawasaki Vulcan 88 (VN1500-A4)

OIL PUMP

This part is number 92022 on this diagram
Quantity required per assembly: 1

1991 Kawasaki KLR250 (KL250-D8)

SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1991 Kawasaki Vulcan 88 (VN1500-A5)

OIL PUMP

This part is number 92022 on this diagram
Quantity required per assembly: 1

1992 Kawasaki KLR250 (KL250-D9)

SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1992 Kawasaki Vulcan 88 (VN1500-A6)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1993 Kawasaki KLR250 (KL250-D10)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1993 Kawasaki Vulcan 88 (VN1500-A7)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1994 Kawasaki KLR250 (KL250-D11)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1994 Kawasaki Vulcan 88 (VN1500-A8)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1995 Kawasaki KLR250 (KL250-D12)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1995 Kawasaki Vulcan 88 (VN1500-A9)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1996 Kawasaki KLR250 (KL250-D13)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1996 Kawasaki Vulcan 1500 (VN1500-A10)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1996 Kawasaki Vulcan 1500 Classic (VN1500-D1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1996 Kawasaki Vulcan 1500 L (VN1500-C3)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1997 Kawasaki KLR250 (KL250-D14)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1997 Kawasaki Vulcan 1500 (VN1500-A11)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1997 Kawasaki Vulcan 1500 Classic (VN1500-D2)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1997 Kawasaki Vulcan 1500 L (VN1500-C4)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1998 Kawasaki KLR250 (KL250-D15)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1998 Kawasaki Vulcan 1500 (VN1500-A12)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1998 Kawasaki Vulcan 1500 Classic (VN1500-E1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1999 Kawasaki KLR250 (KL250-D16)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

1999 Kawasaki Vulcan 1500 (VN1500-A13)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1999 Kawasaki Vulcan 1500 Classic (VN1500-E2)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1999 Kawasaki Vulcan 1500 Drifter (VN1500-J1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1999 Kawasaki Vulcan 1500 Nomad (VN1500-G1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

1999 Kawasaki Vulcan 1500 Nomad (VN1500-G1A)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2000 Kawasaki KLR250 (KL250-D17)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

2000 Kawasaki Vulcan 1500 Classic (VN1500-E3)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2000 Kawasaki Vulcan 1500 Classic Fi (VN1500-N1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2000 Kawasaki Vulcan 1500 Drifter (VN1500-J2)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2000 Kawasaki Vulcan 1500 Nomad (VN1500-G2A)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2000 Kawasaki Vulcan 1500 Nomad Fi (VN1500-L1)

OIL PUMP/OIL FILTER

This part is number 92022 on this diagram
Quantity required per assembly: 1

2001 Kawasaki KLR250 (KL250-D18)

REAR SUSPENSION

This part is number 92022 on this diagram
Quantity required per assembly: 6

Kawasaki - Washer, 20.1X28x1 - 92022-1547

Manufacturer

Manufacturer Part#

Item Number

Special order item

Frequently Bought Together

Parts used in this repair

This part is utilized in 168 assemblies Filter list by year 2026 2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984

1984 Kawasaki KL600 (KL600-A1)

1985 Kawasaki KL600 (KL600-B1)

1985 Kawasaki KLR250 (KL250-D2)

1986 Kawasaki KL600 (KL600-B2)

1986 Kawasaki KLR250 (KL250-D3)

1987 Kawasaki KLR250 (KL250-D4)

1987 Kawasaki Vulcan 88 (VN1500-A1)

1987 Kawasaki Vulcan 88 SE (VN1500-B1)

1988 Kawasaki KLR250 (KL250-D5)

1988 Kawasaki Vulcan 88 (VN1500-A2)

1988 Kawasaki Vulcan 88 SE (VN1500-B2)

1989 Kawasaki KLR250 (KL250-D6)

1989 Kawasaki Vulcan 88 (VN1500-A3)

1989 Kawasaki Vulcan 88 SE (VN1500-B3)

1990 Kawasaki KLR250 (KL250-D7)

1990 Kawasaki Vulcan 88 (VN1500-A4)

1991 Kawasaki KLR250 (KL250-D8)

1991 Kawasaki Vulcan 88 (VN1500-A5)

1992 Kawasaki KLR250 (KL250-D9)

1992 Kawasaki Vulcan 88 (VN1500-A6)

1993 Kawasaki KLR250 (KL250-D10)

1993 Kawasaki Vulcan 88 (VN1500-A7)

1994 Kawasaki KLR250 (KL250-D11)

1994 Kawasaki Vulcan 88 (VN1500-A8)

1995 Kawasaki KLR250 (KL250-D12)

1995 Kawasaki Vulcan 88 (VN1500-A9)

1996 Kawasaki KLR250 (KL250-D13)

1996 Kawasaki Vulcan 1500 (VN1500-A10)

1996 Kawasaki Vulcan 1500 Classic (VN1500-D1)

1996 Kawasaki Vulcan 1500 L (VN1500-C3)

1997 Kawasaki KLR250 (KL250-D14)

1997 Kawasaki Vulcan 1500 (VN1500-A11)

1997 Kawasaki Vulcan 1500 Classic (VN1500-D2)

1997 Kawasaki Vulcan 1500 L (VN1500-C4)

1998 Kawasaki KLR250 (KL250-D15)

1998 Kawasaki Vulcan 1500 (VN1500-A12)

1998 Kawasaki Vulcan 1500 Classic (VN1500-E1)

1999 Kawasaki KLR250 (KL250-D16)

1999 Kawasaki Vulcan 1500 (VN1500-A13)

1999 Kawasaki Vulcan 1500 Classic (VN1500-E2)

1999 Kawasaki Vulcan 1500 Drifter (VN1500-J1)

1999 Kawasaki Vulcan 1500 Nomad (VN1500-G1)

1999 Kawasaki Vulcan 1500 Nomad (VN1500-G1A)

2000 Kawasaki KLR250 (KL250-D17)

2000 Kawasaki Vulcan 1500 Classic (VN1500-E3)

2000 Kawasaki Vulcan 1500 Classic Fi (VN1500-N1)

2000 Kawasaki Vulcan 1500 Drifter (VN1500-J2)

2000 Kawasaki Vulcan 1500 Nomad (VN1500-G2A)

2000 Kawasaki Vulcan 1500 Nomad Fi (VN1500-L1)

2001 Kawasaki KLR250 (KL250-D18)

This part is utilized in 168 assemblies