Polaris - Module, Controller - 4011657

Was having intermittent electrical loss on my '06 Sportsman X2. Went through the basics of checking for loose battery terminals, replacing ignition and replacing the kill switch. Read a couple of Polaris forums that suggested the power distribution module (PDM) may be going bad. Ordered the PDM from 2wheelpros and received it within a couple of days. Simple replacement, but in an awkward place (right in front of the radiator). Took me about an hour. ATV is working and reliable again.

My 2007 Polaris X2 500 was running for 5-6 miles and would stop in mid ride by backfiring and stalling. I would turn off key and then after 5-10 seconds it would start again. Changed spark plug, spark plug wire & solenoid. No luck! Decided to spend the $550 for new EMC. It was quite easy to change out. Put it back together and was still doing the same thing! I checked all my work and found that I had not tightened the battery cables. After tightening them, NO MORE Problems!!!!!! Thanks Adept!