Triumph - Footrest, Front, Rh - T2080249

Peg (Footrest) was broken during an accident. I was sideswiped from behind on the right. The peg naturally won't fold away in that direction and one of the two ears was snapped off.

To remove the retaining pin the bracket must be removed from the bike due to interference with the transmission bell housing. The removal involves three socket head screws one of which is the pivot for the rear brake pedal and the return spring for the pedal. Removal of these screws resulted in the seat/fender strut sagging causing the bolt holes to misalign. The spring easily unhooks once the screws are removed. Once the bracket was removed the peg swap was easy, reusing the pin, spring and retainer. Only a flat blade screw driver was needed for removing and installing the pin retainer clip. Remounting the repaired assembly required lifting the seat structure to realign the holes, this is easier with a second person but could be done alone. Reattach the spring and loose fit the brake pedal pivot before starting first bolt. Evenly tighten the socket head cap screws and you're done. Total repair less than 10 min.