OEM Parts Yamaha Cylinder, Kit, Master

Yamaha

Yamaha - Cylinder, Kit, Master - 5MT-W0041-00-00

Check if this part fits your Yamaha model

Manufacturer

Brand New, Genuine Yamaha Part

Manufacturer Part#

5MT-W0041-00-00

Item Number

OEM233102

$53.52 MSRP $68.98

-

+

Add to cart

Backordered from the manufacturer

Provided by Adept Powersports customers like you

Installation Instructions and Repair Stories

James from Addison, IL Saturday, July 20, 2013

Was replacing OEM brake lines on 02 R6, decided to replace master cylinder internals at the same time, since brake fluid was drained and parts were original 11 years old.
Step one: drain brake fluid by opening bleeder on caliper and pumping brake lever until reservoir is empty.
Step two: remove reservoir from bracket, and unscrew banjo bolt from master cylinder
Step three: remove master cylinder from clip on.
Note: loosen lever bolt before removing to make it easier later. don't forget to disconnect brake light switch.
Step four: remove lever bolt and lever from master cylinder.
Step five: remove dust cover
Step six: remove circlip retainer
Step seven: remove master cylinder internals (make sure to remember what order and direction everything is facing)
Step eight: fit rubber gasket on metal plunger (hardest part of the entire job, recommend a small dull flathead screwdriver to use as leverage, gasket will stretch considerably so don't worry about that, use of provided grease also helps)
Step nine: liberally apply assembly grease (provided) on all parts, and assemble in master cylinder, ensure proper function, no binding, etc.
Step ten: reinstall circlip
Step eleven: apply grease on protruding plunder and apply dust cover, ensure fully seated.
Step twelve: reassemble lever, reattach brake light switch wires, and remount master cylinder on clip on.
Step thirteen: reattach brake reservoir and banjo bolt, refill brake reservoir
Step fourteen: bleed brakes to remove any air trapped in lines. Tip: loosen the banjo bolt to bleed the master cylinder, it speeds up the bleeding process, just make sure to hold a rag under to catch any brake fluid.
Job complete!
Step fifteen (optional): enjoy a nice cold beer in celebration of your success.

Difficulty level: Average

Were these instructions helpful?

Parts used in this repair

Total price: $53.52

This item: Yamaha CYLINDER, KIT, MASTER (5MT-W0041-00-00) $53.52

This part is utilized in 26 assemblies

2001 Yamaha CHAMPIONS LIMITED EDITION (YZFR6SN)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2001 Yamaha CHAMPIONS LIMITED EDITION (YZFR6SNC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2001 Yamaha R6 (YZF-R6N)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2001 Yamaha R6 (YZF-R6NC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2002 Yamaha YZFR6 (YZFR6P)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2002 Yamaha YZFR6 (YZFR6PC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2003 Yamaha R6 (YZFR6R)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2003 Yamaha R6 (YZFR6RC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2003 Yamaha R6 (YZFR6SR)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2003 Yamaha R6 (YZFR6SRC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2004 Yamaha YZF-R6 (YZFR6S)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2004 Yamaha YZF-R6 (YZFR6SC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2004 Yamaha YZF-R6 (YZFR6SCS)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2004 Yamaha YZF-R6 (YZFR6SS)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2006 Yamaha R6S (YZFR6SV)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2006 Yamaha R6S (YZFR6SVC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2007 Yamaha R6S (YZFR6SW)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2007 Yamaha R6S CA (YZFR6SWC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2008 Yamaha R6S (YZFR6SXB)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2008 Yamaha R6S (YZFR6SXL)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2008 Yamaha R6S CA (YZFR6SXBC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2008 Yamaha R6S CA (YZFR6SXLC)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2009 Yamaha YZFR6S (YZFR6SYB)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2009 Yamaha YZFR6S (YZFR6SYCB)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2009 Yamaha YZFR6S (YZFR6SYCL)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

2009 Yamaha YZFR6S (YZFR6SYL)

FRONT MASTER CYLINDER

This part is number 002 on this diagram
Quantity required per assembly: 1

Back to top