OEM Parts Ducati 2007 Ducati Monster Testastretta S4R Workshop Service Tools

2007 Ducati Monster Testastretta S4R - Workshop Service Tools

Please note: If a part is displayed on the diagram but not shown in the parts list, it is no longer available.
Location Part Description
1

HEADS NUTS WRENCH MR-SBE-SS/05. HEAD NUTS HOLDER WRENCH.

Part #: 887132676 Required per assembly: 1
Currently Not Available
2

TOOL. TOOL TO DRIVE VALVE SEAL RING °7.

Part #: 887131429 Required per assembly: 1
Currently Not Available
3

VALV.RET.SPRI.CAP GAU.748-S402. SPACER FOR CHECKING LOWER VALVE SHIM.

Part #: 887651298 Required per assembly: 1 Note: 887650978
Currently Not Available
4

GRADUATED DISC BEARING TOOL. DEGREE WHEEL HOLDER TOOL FOR IGNITION
ADVANCE CHECK.

Part #: 887651523 Required per assembly: 1 Note: 887130123
Currently Not Available
4

GRADUATED DISC. DEGREE WHEEL.

Part #: 981120002 Required per assembly: 1
Currently Not Available
5

FEELER GAUGE THICKNESS 0,1 MM. FORK FEELER GAUGE 0.1 MM.

Part #: 887651000 Required per assembly: 1
Currently Not Available
5

FEELER GAUGE. FORK FEELER GAUGE 0.2 MM.

Part #: 887651005 Required per assembly: 1
Currently Not Available
5

FEELER GAUGE. FORK FEELER GAUGE 0.3 MM.

Part #: 887651006 Required per assembly: 1
Currently Not Available
6

TIMING BELT CONTROL GAUGE.

Part #: 887650999 Required per assembly: 1 Note: 887130748
Currently Not Available
7

HEAD ASSEM.SUPP.HS-SS-MR-ST/01. HEAD MOUNTING BASE.

Part #: 887132103 Required per assembly: 1 Note: 887130891
Currently Not Available
8

FLYWHEEL NUT TIGHT.WREN.996R01. FLYWHEEL WRENCH.

Part #: 887132036 Required per assembly: 1
Currently Not Available
9

ENGINE SUPPORT STAND. BENCH FOR ENGINE REPAIR.

Part #: 887131832 Required per assembly: 1
Currently Not Available
10

INSTALLING CLUTCH SLEEVE. SLEEVE FOR INSTALLING CLUTCH BELL GEAR.

Part #: 887005665 Required per assembly: 1
Currently Not Available
11

GEAR SELECT.TOOL. PLATE FOR POSITIONING GEAR ENGAGEMENT FORK.

Part #: 887133334 Required per assembly: 1 Note: 887131091
Currently Not Available
12

CLUTCH DRUM WRENCH 748 B-S4/02. WRENCH TO HOLD CLUCH HOUSING DRUM STEADY.

Part #: 887132133 Required per assembly: 1 Note: 887130146
Currently Not Available
13

RED ENGINE COVER. ENGINE CANVAS.

Part #: 887131886 Required per assembly: 1
Currently Not Available
14

CRANKCASE ASSEMBLING CAP. CRANKCASES ASSEMBLING CAP.

Part #: 887005749 Required per assembly: 1
Currently Not Available
15

TOOL. TOOL FOR ASSEMBLING WATER PUMP FRONT SEAL.

Part #: 887130869 Required per assembly: 1
Currently Not Available
16

TOOL. TOOL FOR ASSEMBLING WATER PUMP FRONT SEAL.

Part #: 887130870 Required per assembly: 1
Currently Not Available
17
Currently Not Available

Other assembly diagrams for this model

Back to top
​